Transceiver portabil 27 MHz (CB), INTEK, AM/FM, 4W, Afisaj LED

CB 27 MHz AM/FM handheld transceiver, with 8-band programmable multi standard circuit design, matching the frequency & operating mode requirements of various countries. Very compact and light case (185 gr. only). Backlighted LCD display with 3-digit band/channel reading and battery level meter.  Low voltage/low current drain MOSFET transmitter circuit design, full 4W RF power, radio is powered with only 6 pcs AA batteries.  Hi-Low transmitter power for battery saving and mobile car  adaptor (optional). One radio only, ready for use in all the  European countries !

• MULTI STANDARD CIRCUIT DESIGN
• 8 BANDS PROGRAMMABLE
• BACKLIGHTED LCD DISPLAY
• 3-DIGIT CHANNEL/ BAND DISPLAY
• LCD DISPLAYS CHANNEL NUMBER, AM OR FM MODE, HI-LOW TX POWER LEVEL
• LOCK FUNCTION AND BATTERY CHARGE LEVEL
• ADVANCED LOW CURRENT DRAIN MOSFET TRANSMITTER CIRCUIT DESIGN
• TRANSMITTER SELECTABLE HI-LOW POWER (1W - 4W) AM/FM
• KEYPAD LOCK
• TX LED INDICATOR
• MANUAL SQUELCH CONTROL OR FIXED SQUELCH (AS) FUNCTION
• BATTERY 4-LEVEL INDICATOR
• ONLY 6 X AA RECHARGEABLE OR ALKALINE BATTERIES REQUIRED
• STANDARD 2-PIN EXTERNAL EARSET-MICROPHONE JACK
• OPTIONAL CAR ADAPTOR FOR MOBILE USE (CAR-520)
• OPTIONAL 230VAC ADAPTOR CHARGER (AC-520)
• CONTACTS FOR CAR ADAPTOR AND FOR DESK TYPE RAPID CHARGER

Specifications:

Channels: Refer to programmed band
Modes (AM, FM): Refer to programmed band
Operating Temp.: -10°/+55°C
DC Input Voltage: 7.2V (6 x AA Ni-MH battery) or 9.0V (6 x AA Alkaline battery)
Size: 68(L) x 146(H) x 38(D)
Weight: 185g

Transmitter:

System: CPU Controlled PLL Synthesizer
Max Output Power: 4W at 13.2Vdc
Modulation: AM (from 85% to 95%)
FM (1.8 KHz ±0.2 KHz)
Output Impedance: 50 Ohm unbalanced
Current Drain: 1500 mA (at no modulation)

Receiver:

System: CPU Controlled Double Conversion Super Heterodyne
IF: 1° 10.695 MHz
2° 455 KHz
Sensitivity: 0.5µV for 20dB SINAD (FM)
0.7µV for 20dB SINAD (AM)
Audio Output Power @10% THD: 0.3W at 8 Ohm
Audio Distorsion: <8% at 1 KHz
Image Rejection: 61dB
Adjacent Channel. Rejection 61dB
Signal/Noise Ratio: 45dB
Current Drain: 70 mA (stand-by)